Today, I'd like to introduce the reason of high temperature agitator to you. Let's have a brief understanding of the reason of high temperature agitator. Here is the data I collected from the summary for your reference:

一、冷卻風扇不轉。冷卻風扇可由溫度開關控制;它也可以由水溫傳感器控制。

1、 The cooling fan does not turn. The cooling fan can be controlled by a temperature switch; it can also be controlled by a water temperature sensor.

2. 冷卻介質不足。防凍液:高檔車全年均需添加防凍液;水或蒸餾水:臨時代用品;水箱蓋漏水了。

2. Insufficient cooling medium. Antifreeze: antifreeze needs to be added to high-grade cars all year round; water or distilled water: temporary substitutes; water tank cover is leaking.

3.恒溫器壞了。如果要拆卸恒溫器，則應堵塞小的循環，以便保證冷卻劑全部由水箱加熱;安裝新溫控器時，應注意有水孔，如桑塔納沒有水孔，此時應用6mm鉆孔。一個功能是標記;另一個影響是汽車在加熱過程中，兩邊溫控器的溫度差，使溫控器隨水溫準確打開。

3. The thermostat is broken. If the thermostat is to be disassembled, the small circulation shall be blocked to ensure that all the coolant is heated by the water tank; when installing the new thermostat, attention shall be paid to the existence of water holes. If there is no water hole in Santana, 6mm drilling shall be applied at this time. One function is to mark; the other is to make the temperature difference between the temperature controllers on both sides of the car open accurately with the water temperature during the heating process.

水箱堵塞了。(1)用水或氣體進行外部堵塞以清除污垢;內部的堵塞會影響冷卻劑的循環，產生壓力，然后會有兩種結果，一是水箱泄漏，另一種是在水溫特別高的時候高速運行。

The water tank is blocked. (1) Water or gas is used for external blocking to remove dirt; internal blocking will affect the circulation of coolant and generate pressure, and then there will be two results: one is water tank leakage, the other is high-speed operation when the water temperature is particularly high.

5、泵衰竭。(1)葉輪打滑或卡死，造成正時皮帶斷裂;(2)葉輪變形。

5. Pump failure. (1) The impeller slips or gets stuck, causing the timing belt to break; (2) the impeller is deformed.

汽缸侵蝕。(1)燃燒室和通道，此時會從排水管排出或白煙，導致水箱經常缺水;(2)水路、油路(油有水白);(3)水渠與水渠之間，造成熱缸體不良，特別是在高速時沖擊較大;通道被阻塞了。

Cylinder erosion. (1) At this time, the combustion chamber and channel will be discharged from the drain pipe or white smoke, resulting in frequent water shortage of the water tank; (2) the water way and oil way (oil has white water); (3) between the water channel and the water channel, resulting in poor thermal cylinder block, especially in high-speed impact; the channel is blocked.

七、點火正時不正確。

7、 Incorrect ignition timing.

以上就是攪拌器水溫過高的原因。我們將不斷完善自我，以穩定的產品質量，周到的銷售服務來回報新老客戶。歡迎與我們洽談合作。本公司愿與海納百川的胸懷攜手共進，廣交朋友。

That's why the water temperature of the agitator is too high. We will constantly improve ourselves to return new and old customers with stable product quality and thoughtful sales service. Welcome to discuss and cooperate with us. The company is willing to work hand in hand with the mind of Haina Baichuan to make friends.