The components of the automatic self feeding mixer can be divided into ten parts: chassis system, hydraulic transmission system, mixing tank, discharge system, cleaning system, subframe, control system, supporting wheel system, feeding system and circuit system.

底盤系統：攪拌車的主要組成部分，整個混凝土攪拌車的運輸功能就是由底盤來實現的。

Chassis system: the main component of the mixer truck. The transportation function of the whole concrete mixer truck is realized by the chassis.

液壓傳動系統：將經取力器取出的發動機動力，轉化為液壓能(排量和壓力)，再經馬達輸出為機械能(轉速和扭矩)，為攪拌筒轉動提供動力攪拌罐體：攪拌筒是整個攪拌運輸車的關鍵部件，是存儲混凝土的容器，對防止混凝土固化、離析起著決定性的作用。罐體內部有葉片，主要起攪拌與導料的作用出料系統：主要由主卸料槽、副卸料槽、鎖緊桿等組成，副卸料槽起延長主卸料槽的長度的作用清洗系統：清洗系統主要由壓力水箱、水槍、水管、閥等組成。采用氣壓供水，主要作用是在裝完料后沖洗料斗及出料完畢后沖洗拌筒、卸料槽，防止混凝土粘結副車架：攪拌車副車架是主要的承重部分，作業時的載荷幾乎都是通過它來支撐再傳遞給底盤，同時還能緩解路面的顛簸。整個副車架由主梁、前臺支撐架、后臺支撐架組成操縱系統：操作系統由控制器、聯動軸、軟軸及連桿機構組成，主要控制攪拌筒的轉速及旋轉方向托輪系統：攪拌罐后部與副車架連接的部位，主要起支撐滾筒體的作用進料系統：主要由進料斗與支架組成，進料斗由于受沖擊磨損較大，材料要求耐磨性好，支架主要起減輕沖擊力的作用電路系統：主要指攪拌車的整個的電路，包括整車的尾燈，側標志燈、示廊燈、冷卻風扇電機等

Hydraulic transmission system: convert the engine power taken out by the power takeoff into hydraulic energy (displacement and pressure), and then output into mechanical energy (speed and torque) by the motor to provide power for the rotation of the mixing drum. Mixing tank: the mixing drum is the key component of the whole mixing truck and the container for storing concrete, which plays a decisive role in preventing concrete solidification and segregation. There are blades inside the tank, which mainly play the role of mixing and guiding. The discharge system is mainly composed of main discharge tank, auxiliary discharge tank and locking rod. The auxiliary discharge tank plays the role of prolonging the length of the main discharge tank. The cleaning system is mainly composed of pressure water tank, water gun, water pipe, valve, etc. Pneumatic water supply is adopted, which is mainly used to flush the hopper after loading and the mixing drum and unloading tank after discharging, so as to prevent the concrete from bonding to the subframe: the subframe of the mixing truck is the main load-bearing part, and almost all the loads during operation are supported and transmitted to the chassis through it, and it can also alleviate the bumps of the road. The whole subframe is composed of main beam, front support frame and back support frame. The operating system is composed of controller, linkage shaft, flexible shaft and connecting rod mechanism, which mainly controls the speed and rotation direction of mixing drum. The supporting wheel system: the part connected between the rear of mixing tank and subframe, which mainly supports the drum body. The feeding system: mainly composed of feed hopper and support, Due to the large impact wear of the feed hopper, the material requires good wear resistance. The support mainly plays the role of reducing the impact force. The circuit system mainly refers to the whole circuit of the mixer truck, including the tail lamp, side marker lamp, corridor lamp, cooling fan motor, etc

以上這些內容就是關于全自動自上料攪拌車http://www.ranhaofz.cn/相關內容，如果您想要了解更多內容，歡迎聯系在線客服，我們必將竭誠為您服務。

The above contents are about the automatic self loading mixer http://www.ranhaofz.cn/ If you want to know more, please contact online customer service. We will serve you wholeheartedly.