1. Maintain the rated load of the equipment of the self feeding flat mouth mixer

像這類的工程機械設備的載荷性質以及大小對設備零件的損耗都是有著重要影響的，一般機械零件的磨損都是會隨著負荷的增加而增加的，當零件所承受的載荷高于設計的工作載荷時，其部件磨損將會不斷加劇。

The load nature and size of such construction machinery have an important impact on the loss of equipment parts. Generally, the wear of mechanical parts will increase with the increase of load. When the load borne by the parts is higher than the designed working load, the wear of parts will continue to intensify.

2、及時清潔，減少對機械雜質對設備的影響

2. Clean in time to reduce the impact of mechanical impurities on the equipment

機械雜質一般指的是灰塵、泥土等物質和工程機械在使用過程中自身產生的一些金屬屑、油垢等。這些雜質一旦到達機械的工作表面之間，其危害是很大的：不但使摩擦力大，油耗升高。而且會破壞潤滑油膜，擦傷配合表面。

Mechanical impurities generally refer to dust, soil and other substances, as well as some metal chips and oil dirt produced by construction machinery in the process of use. Once these impurities reach the working surface of the machine, their harm is great: not only make the friction force large, but also increase the fuel consumption. It will also damage the lubricating oil film and scratch the mating surface.

3、預防自上料平口攪拌機零件腐蝕

3. Prevent corrosion of parts of self feeding flat mouth mixer

腐蝕作用在零件上，有時不易被發現，容易被人忽視，危害性更大。雨水、空氣中的化學物質等通過機械零部件的管道、縫隙等滲入機械，腐蝕零件。被腐蝕的零件繼續工作也會使機械加速磨損，增加機械故障。這就要求管理者和操作人員要根據當時當地的天氣情況、工地現場情況，采取合理的施工安排，盡可能減小化學腐蝕對機械零件的危害。

Corrosion on parts is sometimes difficult to find, easy to be ignored and more harmful. Rainwater and chemicals in the air penetrate into the machinery through the pipes and cracks of mechanical parts and corrode the parts. The continued operation of corroded parts will also accelerate the wear of machinery and increase mechanical failure. This requires managers and operators to take reasonable construction arrangements according to the local weather conditions and site conditions, so as to minimize the harm of chemical corrosion to mechanical parts.

4、保持自上料平口攪拌機設備零件的合理溫度

4. Maintain the reasonable temperature of the equipment parts of the self feeding flat mouth mixer

在工作中，各個零部件的溫度都有各自的正常范圍。溫度過高過低會影響零件的強度，所以需要配合冷卻液和潤滑油控制部分零件的溫度，使他們工作在合理溫度范圍。

In operation, the temperature of each part has its own normal range. Too high or too low temperature will affect the strength of parts, so it is necessary to cooperate with coolant and lubricating oil to control the temperature of some parts to make them work within a reasonable temperature range.

很多機械設備在故障在開始的時候都是由于零件磨損引起的，自上料平口攪拌機在操作運行過程中自然也同樣如此。因此，在使用過程中降低對設備零件的磨損，能夠更好的避免機械設備在使用過程中的故障發生。

Many mechanical equipment failures are caused by parts wear at the beginning, and the same is naturally true during the operation of the feeding flat mouth mixer. Therefore, reducing the wear of equipment parts in the process of use can better avoid the failure of mechanical equipment in the process of use.