1. Prevent overheating of the concrete mixer engine body: due to the high ambient temperature, the engine is easy to overheat. It is necessary to strengthen the inspection and maintenance of the engine cooling system, including the inspection of water tank, thermostat, water pump, fan and other components, and pay attention to the timely filling of cooling water. When the water temperature exceeds 100 ℃, stop in a cool place to cool down, let the engine idle, and lift the engine cover of the concrete mixer to help dissipate heat.

2、防止混凝土攪拌機發動機爆燃：夏季氣溫較高，有時會超過35℃，而這樣的季節，對于一些部件有所老化的汽車來說，發生自然爆燃等的概率也高出很多。所以要做好防范準備。

2. Prevention of engine deflagration of concrete mixer: the temperature is high in summer, sometimes exceeding 35 ℃. In this season, the probability of natural deflagration is also much higher for some aging vehicles. So we should be prepared.

3、防止車漆受損：車漆經過強烈的陽光曝曬，會發舊、起皺，而普通的美容打蠟雖然可以起到一定的預防暴曬效果，但由于任何車蠟都含有矽的成分，久經紫外線照射會銹蝕車漆，留下點點黑斑。車蠟本身起不到增強硬度作用，反而會因溫度過高而很快流失，停車時要注意盡量把車停放在陰涼處。

3. To prevent damage to the car paint: the car paint will get old and wrinkled after being exposed to strong sunlight. Although ordinary beauty waxing can play a certain role in preventing exposure to the sun, because any car wax contains silicon, it will rust the car paint after a long time of ultraviolet radiation, leaving a few black spots. The car wax itself can not enhance the hardness, but will be quickly lost due to high temperature. When parking, pay attention to parking the car in a cool place as far as possible.

4、防止混凝土攪拌機車胎爆裂：氣溫高所以比較容易爆胎，溫度過高時很容易使輪胎變形，抗拉力下降。而作為輪胎本身，氣壓不標準、輪胎老化、性能減弱，或者在行駛過程中輪胎軋到了堅硬的金屬或其他硬物等情況，都會導致汽車突然間爆胎。

4. Prevent the tire of concrete mixer from bursting: the tire is easy to burst due to high temperature. When the temperature is too high, it is easy to deform the tire and reduce the tensile resistance. As for the tire itself, non-standard air pressure, tire aging, performance degradation, or hard metal or other hard objects rolled by the tire during driving will all lead to sudden tire burst.

5、防止混凝土攪拌機發動機潤滑不良：溫度高時，機油粘度下降造成潤滑不良。所以要經常檢查油量油質，并及時添加或更換。要注意及時清洗機油濾清器、散熱器，保證機油通暢、散熱良好，并盡量避免發動機超負荷工作。

5. Prevent poor lubrication of concrete mixer engine: when the temperature is high, the oil viscosity drops, resulting in poor lubrication. Therefore, the oil quantity and quality shall be checked frequently and added or replaced in time. Pay attention to timely clean the oil filter and radiator to ensure smooth oil and good heat dissipation, and try to avoid engine overload.

6、防止混凝土攪拌機剎車制動失靈：制動液在高溫環境中更容易蒸發汽化，在制動管路中形成氣阻，制動蹄片也容易燒蝕，造成制動失靈。所以要經常檢查調整制動系統，下長坡途中應注意停車晾剎，保證制動性能良好。如果發現制動轂發燙，應停車降溫，但不可澆潑冷水，以防制動轂破裂。

6. Prevent the brake failure of concrete mixer: the brake fluid is easier to evaporate in high temperature environment, forming air resistance in the brake pipeline, and the brake shoe is also easy to be ablated, resulting in brake failure. Therefore, the braking system should be checked and adjusted frequently. On the way down a long slope, attention should be paid to parking and braking to ensure good braking performance. If the brake hub is found to be hot, stop the vehicle to cool down, but do not pour cold water to prevent the brake hub from cracking.

以上就是為大家介紹的全自動自上料攪拌車http://www.ranhaofz.cn/的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務.

The above is the fully automatic self feeding mixer introduced to you http://www.ranhaofz.cn/ I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service