Due to the characteristics of the equipment itself, the automatic feeding mixer is widely used in various buildings. The long-term use of the equipment will inevitably cause various fault problems. Most of them have been blocked, but what should we do if such problems occur in the device?

1.每次充電前，用水沖洗進水口，以在進水過程中保持進水口濕潤。

1. Before each charging, flush the water inlet with water to keep the water inlet wet during the water inlet process.

2.在裝載過程中，將裝在車輛上的清洗水箱注滿水。

2. Fill the washing water tank installed on the vehicle with water during loading.

3.充電后，沖洗入口并清潔入口附近的混凝土。

3. After charging, flush the inlet and clean the concrete near the inlet.

4.在施工現場卸貨后，沖洗卸貨箱，然后向混凝土儲箱中添加30-40L的洗滌水。車輛回程期間，保持混凝土儲罐緩慢旋轉。

4. After unloading at the construction site, flush the unloading tank, and then add 30-40l washing water to the concrete storage tank. Keep the concrete tank rotating slowly during the vehicle return.

5.下次裝載之前，請記住將混凝土儲罐中的污水排干。

5. Please remember to drain the sewage in the concrete storage tank before the next loading.

6.每天徹底清潔混凝土儲罐和機器周圍的進口和出口。自上料混泥土攪拌車的清潔點可防止水泥和混凝土結塊。

6. Thoroughly clean the inlet and outlet around the concrete storage tank and the machine every day. The cleaning point of the self loading concrete mixer can prevent cement and concrete from caking.

以上知識是關于自上料混泥土攪拌車很好被阻塞時的處理步驟。我相信每個人都知道這一點。在這里，編輯人員需要提醒大家，他們需要做好設備維護和保養工作，以免設備使用失敗。

The above knowledge is about the handling steps when the loading concrete mixer is well blocked. I believe everyone knows that. Here, the editors need to remind you that they need to do a good job in equipment maintenance to avoid equipment failure.