Since the concrete will solidify into a hard block in a short time, and has certain corrosivity to steel and paint, it is a daily maintenance work to clean the concrete adhered to the concrete storage tank and the inlet and outlet after each use of the concrete tank. These include:

a.每次裝料前用水沖洗進料口，使進料口在裝料時保持濕潤；

a. Flush the feed port with water before each loading to keep the feeding port moist during loading;

b.在裝料的同時向隨車自帶的清洗用水水箱中注滿水；

b. At the same time of loading, fill the water tank with water;

c.裝料后沖洗進料口，洗凈進料口附近殘留的混凝土；

c. After loading, wash the inlet to clean the residual concrete near the inlet;

d.到工地卸料后，沖洗出料槽，然后向混凝土貯罐內加清洗用水30—40L；在車輛回程時保持混凝土攪拌罐車混凝土貯罐正向慢速轉動；

d. After unloading at the construction site, wash the discharge tank, and then add 30-40l of cleaning water into the concrete storage tank; keep the concrete tank of the concrete mixing tank truck rotate slowly in the forward direction when the vehicle returns;

e.下次裝料前切記放掉混凝土貯罐內的污水；

e. Remember to discharge the sewage in the concrete tank before the next loading;

f.每天收工時徹底清洗混凝土貯罐及進出料口周圍，保證不粘有水泥及混凝土結塊。

f. At the end of each day, the concrete storage tank and the area around the material inlet and outlet shall be thoroughly cleaned to ensure that there is no cement and concrete caking.

有了上面的小總結，希望對廣大客戶有所幫助，如果有什么不理解的或者尋求幫助的請點擊我們的網站：全自動自上料攪拌車http://www.ranhaofz.cn或者來電咨詢，我們會盡全力為您解決

With the above summary, I hope to help our customers. If you don't understand or ask for help, please click our website: Zhongke concrete mixer http://www.ranhaofz.cn Or call consultation, we will try our best to solve it for you