1. Maintain the rated load of the automatic feeding mixer device

這種工程機械上的載荷的性質和大小對設備部件的損失有重大影響。通常，機械零件的磨損會隨著負載的增加而增加。當零件上的負載高于設當工作量高時，組件上的磨損繼續增加。

The nature and size of the load on the construction machinery have a significant impact on the loss of equipment components. Generally, the wear of mechanical parts will increase with the increase of load. When the load on the part is higher than the design, when the workload is high, the wear on the assembly continues to increase.

2.及時清潔以減少機械雜質對設備的影響

2. Clean in time to reduce the impact of mechanical impurities on the equipment

機械雜質通常是指建筑機械在使用過程中產生的諸如灰塵，土壤以及一些金屬屑和油脂污漬之類的材料。當這些雜質到達機器的工作表面之間時，危害更大。它不僅增加了摩擦，還增加了油耗。并且它會破壞潤滑膜并損壞配合表面。

Mechanical impurities usually refer to materials such as dust, soil and some metal scraps and grease stains produced in the use of construction machinery. When these impurities reach between the working surfaces of the machine, the harm is greater. It not only increases friction, but also increases fuel consumption. And it will damage the lubricating film and the mating surface.

3.自動上料混凝土攪拌車，防止卡車零件腐蝕

3. Automatic feeding mixer to prevent corrosion of truck parts

腐蝕作用在零件上，很難發現，容易忽略，并且危害更大。空氣中的雨水和化學物質通過管道和機器零件的間隙進入機器，并腐蝕零件。對腐蝕零件的持續工作會加速機器磨損并增加機械故障。因此，管理人員和操作人員需要根據當時的天氣條件和現場條件采用合理的施工系統，以地減少化學腐蝕對機械零件的有害影響。有。

Corrosion on parts is difficult to find, easy to ignore and more harmful. Rainwater and chemicals in the air enter the machine through the gap between pipes and machine parts, and corrode the parts. Continuous work on corroded parts will accelerate machine wear and increase mechanical failure. Therefore, managers and operators need to adopt reasonable construction system according to the weather conditions and site conditions at that time, so as to minimize the harmful effects of chemical corrosion on mechanical parts. yes.

4.保持全自動上料混凝土攪拌車的設備部件的適當溫度

4. Keep the proper temperature of the equipment parts of the automatic feeding mixer

在工作期間，每個組件的溫度都有其自己的正常范圍。如果溫度過高或過低，都會影響零件的強度，因此有必要使用冷卻液和潤滑劑控制某些零件的溫度，以在適當的溫度范圍內運行。

During operation, the temperature of each component has its own normal range. If the temperature is too high or too low, it will affect the strength of the parts, so it is necessary to use coolant and lubricant to control the temperature of some parts in order to operate in the appropriate temperature range.

精彩的內容不多，看到就趕快收藏吧！全自動自上料攪拌車為大家推送精彩的內容，請大家關注我們的網址：http://www.ranhaofz.cn，值得推薦！

There are not many wonderful contents. Please collect them as soon as you see them! Zhongke self feeding mixer will push wonderful content for you. Please pay attention to our website: http://www.ranhaofz.cn It's worth recommending!